Wayne Kennedy
Ring anytime 0409 910 808
Or email here
OR wayne@cmcsales.com.au
E-mail or phone for online orders or pricing requests.
For items not covered here,or for information on these or any other of our products......call any time.
If you wish to purchase any article you see on these pages, ring or e-mail me with your request, I can guide you to the correct product if you are unsure.
Supply your delivery details and I will return an invoice showing costs and payment details.
We are available after hours and in the weekend.
We order each month, which means all our costings will change with each order. The price list below may change up or down, without warning, to reflect the latest in exchange rates and shipping costs.Our fast moving items may change more frequently than the slow moving items. The pricing below is current for items in stock.
All prices below are subject to exchange rates, transport charges and various fees and taxes applied at the wharf.
These are subject to constant change, therefore our pricing may reflect this, and change, without notice.
Jack Plates
click to see jack plate page All Prices below include GST
| 65302 |
Hydraulic PL-65 Hi Speed
5.5 inch setback |
This plate is available as standard and suits up to 300HP
8 seconds full ram travel |
$1390.00 |
| 65201 |
Hydraulic PL-65SS Stainless
5.5 inch setback |
Made of 1/2 inch stainless steel withstainless fasteners.
Made for racing and V8 units up to 300HP. |
enquire |
| 61002 |
Hydraulic 10 inch setback |
Suits up to 300HP. Both Hi speed and normal speed actuation |
$1650.00 |
| 65012 |
Manual 5.5 inch setback |
Suits up to 300 HP Adjustable from top or bottom of plate |
$620.00 |
| 61012 |
Manual 10 inch setback |
Suits up to 300 HP Adjustable from top or bottom of plate |
$790.00 |
| 55012 |
Manual 2 Piece 5.5 inch setback |
Suits up to 300 HP has 5 inch adjustment slots on the side and 1.5 inches at the transom bracket |
$480.00 |
| 40012 |
Manual 2 Piece 4 inch setback |
Suits up to 300 HP has 5 inch adjustment slots on the side and 1.5 inches at the transom bracket |
$480.00 |
| 6077 |
Gauge kit to suit Hydraulic units |
Consists of a Gauge, oil filled sender unit, all brackets, wiring and fitting instructions |
$240.00 |
Static Setback Plates click to see static plate page
| 50012 |
5 inch Vertical Extensions |
Allows the motor to be mounted 5 inches higher. Ideal to mount a XL leg on an L transom |
$320.00 |
| 65213 |
2.5 inch static set back plate |
Can be mounted on ML or PL plates to provide extra setback |
$225.00 |
| 65413 |
4.5 inch static set back plate |
Can be mounted on ML or PL plates to provide extra setback |
$245.00 |
| 70012 |
7 inch static set back plate |
Multi drilled for various engine fitment. 1 inch of adjustment on the transom. Very Strong 1 piece unit |
$645.00 |
| 90012 |
9 inch static set back plate |
Multi drilled for various engine fitment. 1 inch of adjustment on the transom. Strong 2 piece unit. |
$645.00 |
| 20122 |
2 Degree Wedge Plates |
For adjustment of final transom angle.Can give positive or negative trim and can be stacked to suit. Sold in pairs. |
$90.00 |
Tilt and Trim units click to see trim and tilt page
| 13002 |
PT-130 Tilt and Trim unit |
Suits 130 HP and down |
$1190.00 |
| 52100 |
PT-35 Tilt and Trim unit |
Suits 35 HP and down. Ask us about 40 HP on this plate |
$925.00 |
| 13022 |
PT-130 Transom Clamp adaptor |
Used with PT-130 for motors with screw clamps |
$175.00 |
| 51207 |
PT-130 Trim Gauge kit |
Consists of a Gauge, oil filled sender unit, all brackets, wiring and fitting instructions |
$240.00 |
Back to Hydraulic Jack Plate page Back to Manual Jack Plate page Back to Trim and Tilt page Back to Accesories page
| 
