Read about our Jack Plates here

Remember... we have both a Hydraulic and Manual plate for you to look at

LABSPORT VENTILATOR FITTED WITH STANDARD PL-65 & 250 EVINRUDE E-TEC,ON ITS WAY TO WINNING SMOC CLASS IN 2007 BRIDGE TO BRIDGE ON THE HAWKESBURY. LABSPORT BOATS, CMC JACK PLATES AND EVINRUDE FINISHED 1,2,3 IN THIS CLASS

• The "Power-Lift" Jack Plate can improve the performance of virtually any type of outboard.
• This unique outboard motor, hydraulic lifting device works independently of your power trim and tilt, to allow the boat-motor-prop combination to work at it's maximum efficiency.
• The "Power-Lift" Jack Plate gives you the ability to adjust your motor down, for better out of the hole shots, or up, for better top end speed, better fuel efficiency, and more prop clearance in shallow water.
• With the touch of a switch the "Power-Lift" Jack Plate makes it easy to find that optimum height for any condition while underway at full speed!
• Ideal for ski, bass, or work boats.
• In order for your outboard to perform at its full potential and efficiency, it should be adjusted to different heights at different speeds, water conditions and loads in your boat.
• The "Power-Lift" Jack Plate will set your motor back away from the transom 5 1/2 inches which allows the prop to run in "cleaner" water giving the prop a better "bite" and eliminating prop slippage.
• The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater .
  
  Superior Design And Construction
• 
  Superior quality has made the "Power-Lift" the #1 selling transom jack in the world!
• We have been manufacturing top quality transom jacks longer than most of our competitors have been in business.
• No short cuts are taken at CMC. Computer aided design and precision machining of the "Power-Lift" is done totally at our facility so you can be sure to get the best quality transom jack at a very competitive price.
• The "Power-Lift" Jack Plate utilizes a totally waterproof 12 volt DC marine hydraulic system that is rated OVER 3500 KGs of thrust. More lifting capacity than any other transom jack on the market. It is 40% more powerful and much more dependable than electro-mechanical transom jacks on the market.
• The motor bracket moves up and down on a transom bracket by use of rollers Machined from aluminum-bronze alloy.
• These rollers are highly impact resistant, Corrosive resistant, and have a high load carrying capacity. Thrust is eliminated by the stainless steel pin through this roller with a self lubricating non-metallic material (Nylatron GSM) used for thrust guides on either side of the rollers.
• This feature eliminates any vibration or "shimmy" due to load applied from high powered outboards. This patented design virtually eliminates any chance of binding, which is common with other transom jacks.

Get the performance you deserve from your older rig and don't even consider a new rig without a CMC Power-Lift Jack Plate as an absolute part of your option package.

Join the thousands of satisfied CMC Power-Lift Users                                             

Back to Welcome Page