CMC Sales

	2-1/2" Set-back Part No 65213 The 2-1/2 INCH STATIC SET BACK PLATE has 1 1/2 inches of adjustment at the transom. It is most commonly used in conjunction with the manual or hydraulic Power-Lift to give a total of 8 inches of set back. New Product We can also do this fixed Plate in 4-1/2 inch setback. It can be used on its own as a spacer, to move your outboard away from the back of the boat, or it can be used to space any of our other products, ie Jacking Plate, manual or hydraulic.
	2-PC. Manual Available in 4" or 5.5" setback Part No 40012 or 55012 The two-piece adjustable manual has 5 inches of slot adjustment at the motor mounting bracket and 1 1/2 inches of adjustment at the transom bracket. This unit is available in 5.5 inch setback or 4 inch setback.
	5" Vertical Extention Part No 50012 The 5 inch Vertical Extension allows the motor to be mounted 5 inches higher than the standard mounting on the transom. Our customers have used this unit to mount 60 to 130 hp motors higher on the transom. Another application includes mounting the 5 inch vertical extension on the hydraulic Power-Lift to raise the motor higher on shallow running boats that are equipped with tunnel extensions
	7" Static Set-Back Part No 70012 The 7 inch Staic Set Back Plate has 1 1/2 inches of adjustment at the transom bracket and 1 inch of adjustment on the motor bracket. It is available with 4 degrees of positive or negative trim. It also can be purchased with no trim angle. Please specify when purchasing if no trim angle is desired. The dimension from the top of the transom to the top of the motor side is 3 1/2 inches. Multi drill holes allow for various mountings. Wedge plates can be used either side of this plateor any of the other plates
	9" Static Set-Back Part No 90012 The 9 inch static set-back plate has 1-1/2 inches of adjustment at the transom and one inch of adjustment on the motor bracket. The dimension from thetop of the transom side to the top of the motor side is 5 3/4 inches This is 2 piece bracket
	Click Here for pricing and availability

Copyright © 2007 CMC Sales Australia
Website Designed by Microed Computers