Use this Bolt kit to mount your PT-35., The PT 130 mounting bolts are supplied in the kit.
Main Mounting Bolts are Stainless M10 – 1.5 x 100 mm long.
Long enough to go through most transoms, threaded all the way so that you can cut them to length after the unit is fitted.
The smaller mounting bolts are Stainless M8 x 50 mm long.
These are used to go through the bottom mounting holes of your outboard and bolt to the motor plate of the unit.
All bolts come with 2 stainless flat washers and nylock nuts.
The holes in the unit are 1/2 inch or 12.5 mm. These bolts are 10mm.
This gives a little leeway, when mounting the bracket to ensure that the transom supports line up OK.